home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 2000 September
/
VPR0009B.BIN
/
DRIVER
/
DCS
/
S9292NT4
/
s929-2 NT 4.0 driver.exe
/
Config.IT
< prev
next >
Wrap
Text File
|
1999-09-17
|
5KB
|
147 lines
; ***** ALLEGRO ***** ( Italian )
;localization strings
100=ESS Aux
101=ESS CD Audio
102=ESS Sintetizzatore Wavetable
103=ESS Registr
104=ESS Riproduzione
105=ESS Mixer
;about mixer
106=20dB
107=Misuratore
108=Disattiva
109=Origine registr
121=Controllo volume
122=Vol.
123=Controllo reg.
124=Reg.
; for allegro, no Aux, no Video on playback mixer
; for Maestro3, Aux and Video on playback mixer
; for recording mixer
; only name is different
; Maestro3(Aux, Video) - Allegro(mono_mix, dmix)
; system source lines
;
125=Linea
126=CD
127=Aux
128=Video
129=Microfono
130=In telefono
131=Mixer
132=Mix. Mono
133=Sint.
134=Wave
135=Out mono
; docking source lines
;
141=Linea 2
142=CD 2
143=Aux 2
144=Video 2
145=Microfono 2
146=Input telefono 2
147=Mixer 2
148=Mix. mono 2
149=Spkr alloggiam
150=Spkr sistema
151=Abilita risparmio energia
152=Livello 1/Livello 2
153=Mic. 2
154=Altoparl. PC
155=Altoparl. PC 2
156=Altoparl. inserito
;--------------------------------------------------------------------------
; In order to take advantage of the following features, you have to
; 1) take out the first column of ";" from each line you want to use.
; 2) change the right hand side value of "=" depending on need.
; 3) take out ";" from the line containing ;config.ini
; between [allem3] and 1:allem3.sys in file "oemsetup.inf".
; (Here, a line starting with ";" means it's commented out.)
;--------------------------------------------------------------------------
;
; ** START MIXER CUSTOMIZATION for NORMAL/DOCK/UNDOCK States **
;
; Values are Double Word based in reversed format,
; (eg. "03,02,01,00" is really 00010203 Hex)
;
; Bit 0 is for Dock (1 = Enable Control, 0 otherwise)
; Bit 1 is for UnDock (1 = Enable Control, 0 otherwise)
;
; D11/D12 Power Management (2 = ENABLE, 0 = DISABLE)
D11D12APM=0 ; Undocked=NO, Docked=NO
; System CODEC Source Map Output (CD, LINE, AUX, etc.)
SystemCD_Out=3 ; Undocked=YES, Docked=YES
SystemLINE_Out=3 ; Undocked=YES, Docked=YES
SystemAUX_Out=2 ; Undocked=YES, Docked=NO
SystemVIDEO_Out=3 ; Undocked=YES, Docked=YES
SystemMIC_Out=3 ; Undocked=YES, Docked=YES
SystemPHONE_Out=3 ; Undocked=YES, Docked=YES
SystemPCBEEP_Out=3 ; Undocked=YES, Docked=YES
; System CODEC Source Map Input (CD, LINE, AUX, etc.)
SystemCD_In=3 ; Undocked=YES, Docked=YES
SystemLINE_In=3 ; Undocked=YES, Docked=YES
SystemMIC_In=3 ; Undocked=YES, Docked=YES
SystemMIXER_In=3 ; Undocked=YES, Docked=YES
; Docking CODEC Source Map Output (CD, LINE, AUX, etc.)
DockCD_Out=1 ; Undocked=NO, Docked=YES
DockLINE_Out=1 ; Undocked=NO, Docked=YES
DockAUX_Out=0 ; Undocked=NO, Docked=NO
DockVIDEO_Out=0 ; Undocked=NO, Docked=NO
DockMIC_Out=1 ; Undocked=NO, Docked=YES
DockPHONE_Out=0 ; Undocked=NO, Docked=NO
DockPCBEEP_Out=0 ; Undocked=NO, Docked=NO
; Docking CODEC Source Map Input (CD, LINE, AUX, etc.)
DockCD_In=1 ; Undocked=NO, Docked=YES
DockLINE_In=1 ; Undocked=NO, Docked=YES
DockMIC_In=1 ; Undocked=NO, Docked=YES
DockMIXER_In=1 ; Undocked=NO, Docked=YES
;
; ** OTHER CUSTOMIZATIONS **
;
;New_Laptop.Sys=1 ; 1/0 = New/Old Laptop.sys ("New" Laptop.sys means from Jan. 7, 1998 or later)
;Mic20dBOn=0 ; 1/0 = enable/disable Mic Volume 20dB boost
;enableMPU401=1 ; 1/0 = enable/disable MPU401
; Change the first 0 to 1 to enable secondary AC97 line out detection
; Disable secondary AC97 line out detection
;DetectDockingLineOut=1
;SoftexAPM=0 ; 1/0 = enable/disable Softex Power Management Support
;EnableD1D2APM=0 ; 1/0 = enable/disable Power Management (D1-1/D1-2)
;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *)
;SBGPIOData=4037 ; hexa. value (for PIIX4 chip set - external ampilfier)
;SBGPIODataBit=20 ; hexa. value (for PIIX4 chip set - external ampilfier)
;GeneralPower=01 01 00 01
;PowerD0=00 00 00 00
;PowerD1=00 01 01 01
;PowerD2=00 02 02 02
;PowerD3=00 03 03 03
;ConservationIdleTime=30
;PerformanceIdleTime=300
;IdlePowerState=1
;EnableDockingAllinAllout=1 ; 1/0 = enable/disable All-in-All-out
;PCMOutValue=0 ; 0 - 8
;DefaultMasterVol=A0A0 ; hex value (0000-FFFF)
Eapd Support Mode=1
Eapd GPO Polarity And Port=0x1800